Here we are...the secret is unveiled. These are Sprague Hyrel paper-in-oil capacitors. I have a bunch of these, as well as a bunch of Sprague Vitamin Q caps for future projects. Basically, paper-in-oil capacitors have the reputation of having fantastic tone - warm, detailed, and generally yummy on your ears. So I had to try 'em in our Dynaco preamp.
Paper-in-oil, or "PIO" caps, as they are known, have a dielectric composed of oil impregnated paper. There is definitely a cult following for these things; try a Google search and see. Sprague made a series in the 50s and 60s called "Vitamin Q" and these Hyrels. "Hyrel" stood (...stands...) for "High Reliability." I am not sure about this, but legend has it they were made for NASA applications.
These things are built like little tanks - they're pretty hefty and are hermetically sealed. The outside shell is covered with an insulating plastic.
I tested them for leakage on my Heathkit capacitor tester at the rated voltage (400 volts) and they passed with flying colors.
Right before I went to put them into the PAS, I got the bright idea of measuring their capacitance too. I figured I'd try to "match" two pairs for the phono and line circuits. I actually have 10 of these puppies, so I got a pair that measured .948 microfarads and a second pair that measure .944. Still within the 10% tolerance after 50 years. That is quality.
The Hyrels are big indeed and I knew it would be a tight fit. But it actually worked out better than I expected. I just had to bend the leads under the cap bodies and I was able to use the stock Dyna eyelets.
So now we have only 2 caps per board that the signal goes through - a Sprague 716P "Orange Drop" poly-and-foil cap, and these Hyrel PIOs. Here's to hoping we get good results.
The caps do lie on top of some other components, but I don't think they'll cause a problem.
I went with the red shrink tubing on these cause they're supposed to be so hot!